Revision history [back]

click to hide/show revision 1
initial version

Arduino due and Gt202 Configuration

I have configurated arduino due and gt202 but it doesn't work. below is my connection:

Gt202 configuration pin

SPI_CLK(J2.12),
SPI_MISO(J2.10),
SPI_MOSI(J.2.8),
SPI_CS(J.26),
GND(J2.14), 
3.3V(J4.8, J4.4)

Arduino configuration pin:

SPI_CLK(SPI.3), SPI_MISO(SPI.1), SPI_MOSI(SPI.4), SPI_CS(SPI.5), GND(Ground of the board), 3.3V(3.3v of the board)

SPI: this is the SPI socket of arduino due (SPI 3x2M port)

Arduino schematic

Thanks much

Arduino due and Gt202 Configuration

I have configurated arduino due and gt202 but it doesn't work. below is my connection:

Gt202 configuration pin

SPI_CLK(J2.12),
SPI_MISO(J2.10),
SPI_MOSI(J.2.8),
SPI_CS(J.26),
GND(J2.14), 
3.3V(J4.8, J4.4)

Arduino configuration pin:

SPI_CLK(SPI.3),
SPI_MISO(SPI.1),
SPI_MOSI(SPI.4),
SPI_CS(SPI.5),
GND(Ground of the board), 
3.3V(3.3v of the board) 

board)

SPI: this is the SPI socket of arduino due (SPI 3x2M port)

Arduino schematic

Thanks much

Arduino due and Gt202 Configuration

I have configurated arduino due and gt202 but it doesn't work. work, it stuck in print out "write_BOOT_PARAM" on serial

below is my connection:

Gt202 configuration pin

SPI_CLK(J2.12),
SPI_MISO(J2.10),
SPI_MOSI(J.2.8),
SPI_CS(J.26),
GND(J2.14), 
3.3V(J4.8, J4.4)

Arduino configuration pin:

SPI_CLK(SPI.3),
SPI_MISO(SPI.1),
SPI_MOSI(SPI.4),
SPI_CS(SPI.5),
GND(Ground of the board), 
3.3V(3.3v of the board)

SPI: this is the SPI socket of arduino due (SPI 3x2M port)

Arduino schematic

Thanks much